As with any firearm, it is important to find the one that fits the requirements you have for your own needs. When comparing quality made rifles, it is important to know what makes one rifle different from another, such as the M1A Scout Squad rifle vs. the M1A Match rifle.
Both are products of Springfield Armory, Inc. and are semi automatic rifles. The basis of their design was the M14 rifle used by the military. The M1A Match rifle and the M1A Scout Squad are good for both target practice and hunting but can also be used for security. It is not recommended that these firearms should be modified to be fully automatic as it would make the rifle unstable and potentially unsafe to operate.
There are actually two versions of the M1A Match rifle – the National Match M1A and the Super Match M1A. These rifles are more geared towards the commercial market, especially for shooting competitions. The National Match M1A is the more basic of the two while the Super Match M1A has the ability to be customized. As with many rifles available in the market today, various accessories can be added to a M1A Match rifle. It is important to research and most importantly test out the accessories and/or customizations before making your purchase.
The M1A Scout Squad rifle is the version that is mostly marketed to law enforcement for their use. This is an ergonomically designed firearm that is compact and powerful with a reportedly high accuracy rate. While it can be a fairly heavy firearm, the M1A Scout Squad rifle has a clean operating system that is easy to use. Make sure that you have good ear protection with this model as while it has a proprietary muzzle stabilizer, it can discharge quite loudly.
When comparing the M1A Scout Squad rifle vs. the M1A Match rifle, both are known for their sturdy design, dependability and excellent accuracy. It is essential to experience the performance of these firearms personally as you will be able to choose the best one for you. You can also compare their performance over other similar firearms on the market today.
Both the M1A Match rifle and the M1A Scout Squad rifle is on the average more expensive than their semi automatic counterparts also offered on the market. While in today’s economy cost is a major factor with any purchase, it is important to consider value for the money. If you pay more up front for a quality made firearm and have many good years of use, it may cost you less to pay more. A less expensive, lower quality firearm may not be as dependable and may need replaced sooner, therefore costing you more money in the long run.
Keep in mind that avid gun collectors are very particular as to the brands and makes of guns that they collect, as they add value to their collection. When comparing the M1A Scout Squad rifle vs. the M1A Match rifle, you will find that whichever you choose, you will have a quality rifle.
Do you know the number one reason of actually getting a bipod for your rifle? Shooters use bipods if they require fast setup speed and even better stability when it comes to shooting on unlevel ground. Achieving an accuracy below 1/2 moa with bipods requires a lot of care and consistency.
There are a number of reasons to why you would need a Harris Bipods on your M1A Rifle. For one, the bipods clamp securely and quickly to the M1A sling. It clamps to the gas block effectively since there isn't a better mounting point on an M1A. Harris Bipods are also equipped with strong recoil springs to prevent damage to the stock and maintain point of impact. Another thing to note on these Harris Bipods is the fact that their legs are adjustable for height.
The bipods come manufactured with heat treated steel and hard alloys and finished with a black anodized coat. Some of the models of under the Harris Bipods series are Model BR (Bench Rest) Lowest of the Bipods which is most useful for shooting off the bench. The bipods can be adjustable to a height from 6" to 9". Then there’s the Model L (Light). This model is the world's largest selling bipod as it is compact and light. It has an adjustable height from 9" to 13" and weighs 11 oz. Model H: (High) is for prone or sitting position shooting and it's the best for varmint shooting. The height is adjustable from 13 1/2" to 23". In the Model 25C, it is the tallest of the Bipods with the three piece leg construction being adjustable from 13 1/2" to 27"
There are several styles to choose from the Harris Bipods series. Series "M" is a new version of the original Leg Notch Bipod. This version is where the legs eject by spring action and its height is can be adjusted at a rate of 1" increments. The Series "S" features a rotating bipod that rotates to either side for instant leveling on uneven ground. Hinged base has tension adjustment and buffer springs to eliminate tremor or looseness. This model is similar to the non-rotating Series and is available for ALL models except the "H" model.
Harris Rifle Gun BiPod S-BRM 6-9 Inch With Swivel Leg Notch
Time Remaining: 28d 6h 15m
Buy It Now for only: $88.47
Harris Engineering Ultralight Bipod Series 1A2 Model BR 6-9" with QD Lever Mount
Time Remaining: 2h 58m
Harris Bipod 1A2-BRM 6-9 Inch Solid Base 11308
Time Remaining: 13d 10h 10m
Buy It Now for only: $59.29
Harris Bipod 1A2-BR 6-9 Inch Solid Base 11206
Time Remaining: 5d 6h 56m
Buy It Now for only: $59.63
Harris Series 1A2 Bipod Model LM 9-13" (Leg Notch)
Time Remaining: 13d 17h 44m
Buy It Now for only: $60.35
New CCOP Universal Barrel Mount Harris Style Bipod for Tactical Rifle BP-19AS
$25.99 (1 Bid)
Time Remaining: 8h 51m
Harris Bipod 1A2-L 9-13 Inch 11212
Time Remaining: 23d 11h 10m
Buy It Now for only: $64.89
Harris S-LM Bipod Ultralight "S" Swivel Series - Model HBSLM 9"-13" Leg Notched
Time Remaining: 14h 9m
Buy It Now for only: $96.53
Harris Bipod 12" to 25" Swivel Mount Model S-25 Black
Time Remaining: 29d 17h 44m
Buy It Now for only: $109.39
So everybody is talking about the Scout version of the M1A. This new bloke is able to shoot 3-4” or better at 100 yards. The accuracy was so unbelievable that one of the Vietnam veterans once said that it is so accurate that it could “shoot the balls of a mosquito”.
A big plus point is that the M1A Scout’s cleaner operating system is easy to use cause there is no direct gas impingement. This semi-automatic design is good for your target practice, security and of course for any kind of hunting. The only thing that most shooters are concern about is the fact that it is quite expensive and a little heavy.
Anyhow, it is fast becoming the law enforcement favorite. This M1A Scout Squad rifle with forward mounted optical sight base provides an excellent platform for the aim point military sight. The M1A Scout is said to have a lot more hand on. Some say that the iron rifle’ accuracy can go up to 500 yards. It has all the benefits of target acquisition and are vastly improved. Additionally, the passage is unhindered to the receiver mechanism.
Despite having a proprietary muzzle stabilizer, what you really need to know about the M1A Scout is that it is quite a “blast” when you perform your shooting, therefore you need to make sure that you have a good earpro to able to overcome the loud noise.
One more thing you need to know about the M1A Scout is that it is truly compact and powerful. This feature is incomparable to any of the other counterpart. Its 18-inch barrel made possible by a returned gas system. Plus the black fiberglass stock, forward-mounted scout-style scope mount is such a beauty. Due to these facts, the M1A Scout is quite expensive compared to its counterpart, for instance the Armalite AR-10 Carbide. However, in terms of the ergonomics and accuracy, the M1A Scout wins hands down. It is undeniably solid, not like another piece of plastic shooting device like some of its counterparts.
That is why the M1A is known as the Battle Rifle, it is due to its sturdy design and high accuracy. Though it is quite heavy due to its robust design, it is very accurate for a semi-automatic. When you finally use it and have the hands on experience, will help you to understand more about the fantabulous performance of the M1A. A lot of those who have been in the war and have experience with the M1A-the fully automated version have approved of the quality of the M1A Scout.