The Springfield Armory M1A Tanker is a fantastic blend of classic elegance with a compact, full-power rifle. This 7.62x51mm/.308 Win chambered rifle features a chassis that lends itself to agility and maneuverability.
The M1A Tanker also retains some of the iconic Parkerized steel and stained walnut of old. The Tanker is the perfect iron for the shooter searching for practical efficiency with a dash of class.
Why do I think that?
Well, check out my in-depth Springfield Armory M1A Tanker review to find out!
Starting with the…
Springfield Armory M1A Tanker Specs
|Caliber:||.308 Winchester (7.62x51mm NATO).|
|Weight:||8 lbs, 9 oz.|
|Sights:||Ghost ring rear; XS Post tritium with white stripe rear.|
M1A Tanker History
The M1 Garand, developed by John Garand, was the pinnacle of a service rifle. It was tough and dependable in various hostile conditions, but it wasn’t perfect. By the end of WWII, soldiers in the Pacific theater wanted something shorter for jungle combat. You couldn’t blame them…
The Garand’s 24” barrel made it unsuitable for close-quarters combat. They wanted an 18” barreled M1. According to legend, armorers in the Pacific produced over 100 of these. A few were sent to the U.S. for testing.
Nothing to do with Tanks!
This rifle, the T26, was never adopted and was most likely never fielded. It got the nickname “Tanker” along the way, even though its original purpose was unrelated to tank crews. Despite that, Springfield Armory honored the effort with its M1A Tanker.
True, Springfield’s Tanker is a magazine-fed 7.62 NATO M1A rather than a clip-fed .30-06 Garand. However, the concept is the same and makes complete sense for Springfield, which has a long history of producing shortened M1As.
M1A Tanker Controls and Features
The M1A Tanker’s operating system is the same gas-operated, combat-proven design that distinguished the M14 rifle. It has an op rod that drives a rotating bolt that locks into the action when firing.
Next, let’s take a closer look at its other controls.
The Tanker replaces the standard post with an XS Sights post with a tritium insert and a white stripe. It makes the front sight easy to see in most lighting conditions. The rear sight is a standard T105E1, and it might need a minor repositioning to get “mechanical zero.”
Hold the elevation knob while turning the windage knob’s screw until the windage knob is free to move. Then, to align it, simply move the windage knob to the left or right. The front sight is then moved in its dovetail to compensate for windage.
The Tanker has a good trigger for an off-the-shelf M1A, especially considering how old the design is. The crisp two-stage trigger breaks at 4.5 lbs and is reasonably consistent. The first stage takes up about 3 lbs, leaving a little over 1 lb to break the shot.
M1A fans will be familiar with the Tanker’s safety, although not everyone is fond of it. The Tanker features a two-position blade safety in front of the trigger guard which is straightforward to operate. Simply slide it backward to engage and forward to disengage.
Barrel and Muzzle Brake
The M1A Tanker features a short, 16.5” carbon steel barrel with a 1:11 twist. The stubby barrel produces quite a big muzzle blast, but the full-power chambering doesn’t beat you to death.
The barrel also has a ported muzzle, which is similar to the M1A SOCOMs. It has two matching rows of small six-five-six ports at the 11- and 1-o’clock positions. But unlike its other M1A stablemates, mounting optics isn’t very easy. Springfield does make an amazing scope mount, but the Tanker lacks a top Picatinny rail section.
The Tanker’s stock has a hinged buttplate, which is a leftover from the military’s M14 select-fire rifle. The hinged buttplate was initially supposed to provide greater control in full-auto firing mode.
Obviously, the semi-auto Tanker doesn’t need this, but there’s still a hidden accessory compartment underneath to take advantage of. Sling swivel assemblies are also installed on the Tanker’s fore-end and buttstock. The buttstock assembly is fixed, but the fore-end one swings.
Magazine and Mag Release
The M1A Tanker comes with a 10-round magazine, but this can be upgraded to 20 rounds.
There is a trick to inserting the magazine for those who are unfamiliar. It’s inserted at an angle, with the front lip up and in first, then you rock it back into position.
The Tanker’s magazine release is a lever-style release located behind the magazine well. It’s nothing special, but it works well and drops the mags free without any issues.
Springfield Armory M1A Tanker Pros & Cons
- Sturdy and reliable.
- Classic aesthetics.
- Bright muzzle blast.
- No top Picatinny rail.
Shooting the Springfield Armory M1A Tanker
We tested the M1A tanker with various rounds, and it is quite the powerhouse. It’s also impressively accurate for a semi-auto rifle. I got pretty good 50-yard five-shot averages from the bench, with individual groups under 1.5.” But the Tanker is certainly capable of better accuracy in better hands.
As previously mentioned, the Tanker has a great trigger, and it showed in the range test. It’s in position shooting that the trigger really shines. I burned through over 100 rounds from various shooting positions, and all shots broke cleanly. Using a center-mass hold rather than a six-o’clock hold made the sights much easier to use.
Easy to handle…
You’d think a short .308 like the Tanker would be difficult to handle, but it isn’t. The ports do an excellent job of reducing recoil, but it is very, very loud. You may want to double up on hearing protection, especially at a covered range.
However, in the field, the porting makes the Tanker controllable and more comfortable. Even while standing – the position most vulnerable to recoil forces – the rifle got back on target quickly. This is due in part to its weight. The Tanker weighs almost 9 lbs despite its shorter barrel. The M14/M1A was a heavy gun to start with. It’s one of the main reasons why the US military sought a replacement for it in the first place.
The M1A Tanker is really fun to shoot, overall. The thrilling “clack!” you hear when you pull back on the op rod to chamber a round. The sweet aroma of the oil-finished stock. The authoritative feeling you get when you fire a round… You get the idea.
Need Some Quality Accessories for your M1A?
Or, if you’ve been thinking of getting hold of an AR10? Then check out our informative M1A vs AR10 comparison or find out some interesting Facts About M1A Rifles that might aid you with your decision.
The Tanker has everything you’d want in a “head for the hills” rifle. It has great handling, plenty of power, and enough accuracy to get almost any job done.
Whether you use it for training, hunting, competitions, or self-defense, it’s a blast to shoot. And will make a worthy addition to any gun collection.
As always, stay safe and happy shooting!